The underside of my new project is throughly coated in 35 years of dirt and fluid leaks, and the gas powered pressure washer we have at the shop is clunky and would be a total pain in the ass to drag around under a truck. I felt that was a good enough excuse to buy more tools. I almost bought a cheap Harbor Freight pressure washer, but I did some research and found this on amazon with great reviews for only $20 more.
I'll post pics and videos of it in action pretty shortly. Here's the amazon link:
Here it is on Amazon.
Finally got to work on the truck a little. Decided it would be a good idea to install my window regulator so my driver side window rolls up. Here's what I started with.
I took roughly 1848729373 little phillips head screws out, removing all of them except one. This one. The very last screw. The one toward the rear of the door inside the little arm rest pad.
I tried to drill it out and the drill bit snapped off in the screw without hesitation. I decided to poke around by pulling the door panel back and noticed I could get it off if I took off the two 11mm bolts holding this metal bracket on. So that's what I did.
I'll deal with that bastard screw later.
Neat, part numbers!
That got me to here:
I taped up the window so it wouldn't fall and started taking more bolts out.
I got my new window cranks, unfortunately I didn't get my window regulator, so I couldn't really do a whole lot with them. They look shiny though!
As much as I love my Miata, I've been seriously craving some V8 power lately. I briefly considered doing a V8 swap on the Miata, but I didn't want to be without a fun car for a year while I took it all apart and did the swap.
After a little bit of research I settled on the idea of a LSx series engine with a turbo, but I still didn't know what I wanted to put it in. I considered the old RWD Volvo wagons and E34 5 series BMW's, but ultimately I stumbled across a thread on a message board about the older Chevy Trucks. That got the ball rolling. I set up a craigslist alert, posted a want ad, and scoured eBay. I finally hit on an 82 short wheelbase 2wd chevy truck with a very straight body. Here are the pics from the ad:
After a couple of weeks of negotiation I picked it up last Friday and drove it back to the shop from Forrest City, Arkansas.
Interior is a little rough, and the 350 in it is running rich as hell, but all I really wanted was a nice straight body, and it definitely has that. So far I've ordered some suspension stuff to lower it and replace the ancient shocks on it. I'm gonna try to get that done next weekend, along with maybe a rear disc conversion.
I'm also going to try and actually document this build on my website, instead of posting a shitty update once every three months. We'll see how that goes.
This section will not be visible in live published website. Below are your current settings:
Current Number Of Columns are = 3
Expand Posts Area =
Gap/Space Between Posts = 15px
Blog Post Style = card
Use of custom card colors instead of default colors =
Blog Post Card Background Color = current color
Blog Post Card Shadow Color = current color
Blog Post Card Border Color = current color
Publish the website and visit your blog page to see the results
This site uses affiliate links to generate income. This means if you buy a product through one of my links I will earn a small commission. This doesn't increase the cost of the item for you and does not effect editorial content.